The Elephant BV3232P(3pc)-FP-W-ISO-H LONG ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3232P(3pc)-FP-W-ISO-H LONG series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials.

The Elephant PA-DA-105-1 double-acting pneumatic actuator is designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributor Elephant 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.

The Elephant APL-210N limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the LSU, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with pneumatic actuator PA-DA-105-1 double-acting, pneumatic valve 4V320-10 220V, BCV APL-210N:

Sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic valve 4V320-10 220V, BCV APL-210N

Dimensions and sizes of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG with double-acting pneumatic actuator PA-DA-105-1, pneumatic distributor 4V320-10 220V, LSU APL-210N:

Detail and material sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG

Table of parts and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H LONG:

Technical parameters of pneumatic actuator PA-DA-105-1:

Pneumatic actuator PA-DA-105-1

Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:

Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1

PA-DA-105-1 air actuator parts and materials table:

Parts and material sketch of the PA-DA-105-1 pneumatic actuator

Technical parameters of the Elephant 4V320-10 220V pneumatic valve

Limit Switch Block Elephant APL-210N

Technical parameters of the limit switch unit Elephant APL-210N

Table of parts and materials of the limit switch block Elephant APL-210N: