These indented design gas tanks are very smooth looking and enhance the lines of the High Neck Chopper frames. Available for frames with 4" or 6" down tube stretch and 3" minimum backbone stretch. The tunnel easily fits top tubes up to 2" diameter. Tanks come with weld-on mounting brackets, which are recessed in the bottom of the tank for that smooth hidden look. The rear of the tank is tapped 1/8"-27 NPT to take a fuel crossover line. To be used in combination with a 13/16" (22mm) petcock.

GAS TANKS The zinc-chromate primer finish on some of our tanks is provided for the protection of the tanks during shipment and storage. It is not recommended as a primer finish for paint applications without proper surface preparation. As with any fuel tank, particularly one where custom paint is to be applied, all tanks must be pressure tested, then cleaned with tank cleaner and sealed with tank sealer before painting, to protect the final finish and prevent internal rust during winter storage. Fuel capacity is measured with tank in upright position, angle of parked bike will determine actual capacity of the fuel tank.

Gas Cap styles

Note: Genuine Zodiac gas tanks including their brackets are made from the same or heavier gauge steel as genuine tanks, your guarantee for years and years of reliable service. Feel free to compare the weight of these quality products with cheap imitations.