5.5 gpm 3200 psi Pressure Washer Skid Mounted Cold Honda Annovi Reverberi Pump Pull Start

     5.5 gpm 3200 psi Honda GX390 13 HP Annovi Reverberi RGW2125N pump V-belt, mesh inlet filter, commercial, external bypass EZ start unloader, low oil shutdown, thermal relief valve, 3' gun/wand assembly with quick connects, 50' high pressure hose with quick connects and red, yellow, white and black soap quick connect nozzles.

Oil pre-filled in pump and engine.

     Must tighten belt if needed after a month. A clogged nozzle or nozzles that are sized too small for this unit will break the belt.

This unit should be supplied from a tank. Please add:

• Plumbing kit:  PL-4-TA 
• Plumbing kit: PL-4-TO

Highly recommend

Adding the best high pressure 3/8" ball valve (6292.SM) to this order to allow you to turn off the flow of water to switch from the gun to a Whisper Wash 16" Ultra surface cleaner (6717). 

   You will need 3.5 25-degree nozzles (1769) for your surface cleaner using this unit.

     Add a Kyle Davis shooter nozzle, SN4I and a 6540-4, a M5DS (7019 and a 5200 hex nipple to your order) for the ultimate reach.

Use a 6.0 turbo nozzle (4558 and 1627) for this unit.

• 30W Non-Detergent oil for pump
• 10W30 oil for engine
• Can not be shipped inside the state of California