20% OFF shipping at okunadegoodman.com on orders over $79 + up to 10% OFF products

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > PCAN-M.2 > PCAN-M.2

download picture

description

Report this seller or product

PCAN-M.2Connects CAN and CAN FD networks to a computer board via its M. 2 interface (PCIe) With its small form factor, the plug in card is optimal for embedded PCs, single board computers (SBC), and compact embedded applications. Galvanic isolation between the computer and the CAN signals is a standard feature of this interface card. The PCAN M. 2 comes in single channel, dual channel and 4 CAN channel versions. ISO Non ISO CAN FD Since the first

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

Connects CAN and CAN FD networks to a computer board via its M.2 interface (PCIe)

With its small form factor, the plug-in card is optimal for embedded PCs, single-board computers (SBC), and compact embedded applications. Galvanic isolation between the computer and the CAN signals is a standard feature of this interface card. The PCAN-M.2 comes in single-channel, dual-channel and 4-CAN channel versions.

ISO / Non-ISO CAN FD

Since the first implementations of CAN FD, the protocol has been improved and is now included in the standard ISO 11898-1. The revised CAN FD standard is not compatible with the original protocol.

PEAK-System takes this into account by supporting both protocol versions with their CAN FD interfaces. If required, the user can switch to the CAN FD protocol used in the environment by software (Non-ISO & ISO). Devices delivered until February 2015 need a firmware update for this functionality.

Features
Tech Specs
Documents
Downloads

PCAN-M.2 Card
Connection cable including D-Sub plug for each channel
Device drivers for Windows^® 10, 8.1, 7 and Linux (32/64-bit)
CAN monitor PCAN-View for Windows^®
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
User Manual (PDF)

CAN interface for the M.2 slot (uses PCIe lane)
1 or 2 High-speed CAN channels (ISO 11898-2)
Form factor M.2 type: 2280/2260-B-M
Height 4.6 mm
Complies with CAN specifications 2.0 A/B and FD
CAN FD support for ISO and Non-ISO standards switchable
CAN FD bit rates for the data field (64 bytes max.) from 20 kbit/s up to 12 Mbit/s
CAN bit rates from 20 kbit/s up to 1 Mbit/s
CAN bus connection via connection cable and D-Sub, 9-pin (in accordance with CiA ^® 303-1)
FPGA implementation of the CAN FD controller
Microchip CAN transceiver MCP2558FD
Galvanic isolation on the CAN connection up to 300 V, separate for each CAN channel
CAN termination can be activated through a solder jumper, separately for each CAN channel
PCIe data transfer via bus master DMA
DMA memory access operations with 32- and 64-bit addresses
Measurement of bus load including error frames and overload frames on the physical bus
Induced error generation for incoming and outgoing CAN messages
Extended operating temperature ranges from -40 to 85 °C (-40 to 185 °F)

PCAN-M.2 manual

PDF User's Manual in English

Device driver setup for Windows

Installation package from PEAK-System for device drivers and tools for Windows ® 10, 8.1 (32/64-bit) for our PC interfaces. Tools included: PEAK-CPL, PCAN-View, PLIN-View Pro and Virtual PCAN-Gateway.

Device drivers for Linux

Device driver for PEAK CAN interfaces from Kernel 2.6.

PCAN-View

Software for displaying, sending and recording CAN and CAN FD messages for Windows ® 10, 8.1 (32/64-bit).

PCAN-Basic API

API for developing applications with CAN and CAN FD connections for Windows ® 10, 8.1 (32/64-bit).

PCAN-Basic API (Linux)

API for developing applications with CAN connection for Linux.

PCAN-CCP API

API for developing software for communication with control units according to the CAN Calibration Protocol (CCP) for Windows ® 10, 8.1 (32/64-bit).

PCAN-XCP API

API for developing software for communication with ECUs in accordance with the Universal Measurement and Calibration Protocol (XCP) for Windows ® 10, 8.1 (32/64-bit).

PCAN-ISO-TP API

API for the transmission of data packets according to ISO-TP (ISO 15765-2) for Windows ® 10, 8.1 (32/64-bit).

PCAN-UDS API

API for communication with control units according to UDS (ISO 14229-1) for Windows ® 10, 8.1 (32/64-bit).

PCAN-OBD-2 API

API for vehicle diagnosis according to OBD-2 (ISO 15765-4) for Windows ® 10, 8.1 (32/64-bit).

PCAN-PassThru API

Pass-Thru API and connection of Pass-Thru software to PEAK-CAN interfaces. Installation for Windows ® 10, 8.1 (32/64-bit) including interface DLLs, configuration software, PCAN-Basic API and PCAN-ISO-TP API. Documentation included in the download.

PCAN-M.2

Name: PCAN-M.2
Brand: okunadegoodman.com
SKU: 59691282572
Price: 176.00 USD
Availability: InStock
Rating: 4.488700000000001 (885 reviews)