Do not use Teflon tape on this pump. No warranty on this pump. 8 gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 CCA deep cycle marine battery. 

Tested at the factory and will have water in them

Please choose UPS/FedEx to ship this product.  We will not use USPS. Thank you.

Remco 5.3 gpm 60 psi on demand pump should be powered by a deep cycle marine battery. We recommend using 8 gauge wire, a 30 amp waterproof switch and extra fuses in the waterproof fuse holder. 

This pump will perform at maximum efficiency using 200' of 5/8" chemical hose such as our red, blue or yellow 5/8" Flex Tech RT or the red or blue Kuri Tec hose, 0040, 1550 and 2550 nozzles installed in a JROD connected to a BV08RB.80.

Use our 1" non-collapsible suction hose assembly with the original slotted PVC inlet filter for sodium hypochlorite (AG16TF08-D) installed on the end to prevent debris from entering the pump. Do not use a stainless steel mesh filter or a filter with a fine nylon mesh covering pipe if using this pump for softwashing or with corrosive chemicals. 

Tested at the factory and will have water in them

Do not use Teflon tape on this pump. No warranty on this pump. 8 gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 CCA deep cycle marine battery.

SKU: R5537