The AE-04 controller is ideal for flat tracks, but can be used on any type of professional track.

The factory configuration is international positive.

Has a protection fuse for the transistor.

Comes with 1 spare fuse and 2 resistor sockets (200 and 400 ohm).

Can be used on positive and negative tracks by simply changing the connector configuration on the power board. 

Can be used with any car by changing the resistor socket, regardless of the motor.

Attack Function

This function allows you to adjust the car's acceleration response. The higher the setting, the faster the acceleration response.

Varibrake Function

This function allows you to attenuate the car's braking. This can make driving on small-radius curves and on tighter tracks much easier. The higher the setting, the stronger the braking will be.

Choke Function

This function is used to limit the car's top speed. When the car is very fast, driving on tighter tracks becomes more difficult. In these conditions, you can use the Choke function to attenuate the car's top speed, making driving easier. The function is activated by placing the Choke switch in the “ON” position and adjusting the attenuation with the Choke potentiometer.

Curve Function

With this function, you can make the accelerator more aggressive, similar to changing to a lower resistance chip.