Square, Wood, Half RECESSED PANELED column made from unprimed MDF. The column shaft is 7 5/8" wide, made with 1/2" thick MDF, making the inside opening 6 5/8" square. The column is available in 8ft and 9ft heights. The 9ft version includes a 1ft column shaft extension that is assembled on site. The panelled portion is about 38" high, also made in paint grade MDF. The shaft goes together like a puzzle, using lock mitre joints for easy assembly. All the smaller pieces in the panel kit, and capital/astragal, do require assembly.

Specifications:
Column shaft is 7-5/8" x 7-5/8"; made with 1/2" thick raw MDF
Inside opening is 6-5/8" x 6-5/8"
The Half Panelled portion is about 38" high
2-3/8" Georgian Crown moulding to be applied as the capital on the column (this will add 3-1/4" to the overall footprint at the top of the column)

The column comes unassembled for those of you that would like to use this to wrap around a jack post/support column. The lower rail forms the bottom of the panel kit, and the upper rail and cap trim form the top of the panel kit. The corner stiles make up the corners of the panel kit. You can choose one or both of the shoe trim and baseboard to finish the base, which will determine the overall footprint at the base of your column.

The Kit/Column includes:
BOX#1 (SC-8) 
8" x 8ft Smooth MDF column shaft, made up of 4 panels
BOX#2 (P-PK-MDF)
Pre-packed Half Panel MDF Kit
Includes: Two x 2ft pieces Shoe Trim; Two x 2ft pieces of Primed MDF Baseboard (thickness may vary); 4 pieces of Primed MDF Recessed Corners (pre-made); 4 pieces (pre-cut to fit column shaft) of Primed MDF: Lower Rail, Upper Rail, and PVC Nautical Cap Trim, Capital, and Astragal; Mounting Hardware (Brackets and Screws), Masking Tape, MDF Glue, Cleats, and Installation Tips.

NOTE: The actual column shaft is 95” tall, but when you apply the capital, it will add about 2” to the height, making the overall height slightly over 8ft tall.