Liquid Metal Kit

Liquid Metal is an innovative decorative finish created by mixing fine metal powders with a specialised base. The system combines Bi Plasma 3D Metal Base (Part A) with a hardening agent (Part B) to produce durable, striking metallic surfaces.

The formulation creates a finish that closely replicates real metal, with options for a smooth or textured appearance and a natural metallic sheen. Part B increases hardness and durability, making it ideal for both residential and commercial projects.

Kit Includes:

• 1kg Bi Plasma 3D Metal Base (Part A)

• 750g Metal Powder

• 50g Bi Plasma 3D Hardener (Part B)

Coverage: 1 kit covers approximately 3m², based on a smooth, tight finish.

Already have your own metal powders? You can purchase the Base (Part A) and Hardener (Part B) separately HERE

Where can it be applied?

Liquid Metal kit is a type of Venetian plaster, and creates bespoke metal projects, it can be applied to walls, ceilings, furniture, or statement features, this finish delivers a sophisticated, high-end aesthetic with a contemporary edge. Available in a variety of stunning shades, including brass gold, silver, zinc, bronze, and copper, allowing for endless creative possibilities. 

Surface Preparation

Before applying the Liquid Metal, ensure the surface is properly primed with two coats of Intermedial Primer. This step helps create a stable base and enhances adhesion. Allow the primer to dry fully before proceeding.

Applying the Metal Coating

The Liquid Metal is applied using a trowel and can be built up in 1 to 3 coats, depending on the desired finish and the type of metal being used. For additional creative effects, you can:

• Blend the Liquid Metal with coloured Bi Plasma for a custom metallic tone.
• Layer it over a coarse or medium marmorino finishes like Volare or Infinito to create texture and depth.

Two-Coat System Application

1. First Coat – Apply the first coat evenly and allow it to dry for 1-2 hours. If you have mixed the product, store it in an airtight container to prevent drying out.
2. Second Coat – Once the first coat is dry, apply the second coat and leave it to cure overnight (approximately 24 hours, depending on temperature and humidity).

Sanding & Polishing

Once fully cured, the surface must be sanded to achieve the desired metallic sheen. Follow this sanding sequence for a polished effect:

• Use sanding pads in this order: 320, 600, 1000, 2000, 3000, 4000 grit (ensure you use paper pads with a backing pad attached).
• For a mirror-like finish, remove the backing pad and continue sanding with 3000 & 6000 Trizact discs.

Sealing & Protection

• If applying a wax sealer, you can proceed after the final sanding step.
• If using Microvetro BI as a protective sealer, stop sanding at 1000 grit to ensure proper adhesion.