Free shipping anywhere in the continental USA on these ST coilovers for the Neon SRT-4 and 00-05 Neon!

Do you want to lower your Neon SRT-4 or 00-05 Neon but still want excellent ride quality?

These German made coilovers use a very street friendly spring rate, that are optimized for ride quality. They still handle corners better than stock, however they are not as firm as the BC coilovers. Furthermore, the BC coilovers are a linear spring rate, meaning no matter if you have a small bump or big bump, you feel the same force. These have a progressive spring rate so when you have a small bump it absorbs the bump easily. When you hit a big bump the progressive springs will contract to absorb the impact.

If you are comparing coilovers, price is not the only concern- some cheap coilovers we have seen from China have horrible spring rates (IE, 8k front and 6k rear, which translates to about 480 ft lbs in the front and 360 rear, which is terribly high- you will absolutely hate those)!! These have spring rates of about 250 ft lb front and 200 rear. Factory springs are about 200 ft lbs in the front and 150 in the rear. If you have coilovers with 480 ft lb spring rates, you'll need to visit the hospital for back surgery after you hit a small pothole!

Read this review from Martin that went from some junk Emusa coilovers to these: "I recently installed these on my 2005 srt4. I had the cheap coilovers on them previously. These are so much more comfortable. They ride like stock and feel so much better driving the car. I used to hate driving the car because of how the old coilovers would bounce. I love driving my car again. If you are looking for a great riding coilover, look no further."

Another design benefit, is that these coilovers use the factory upper strut mounts. The OEM upper strut mounts are rubber filled, so when these coilovers are used with OEM upper strut mounts you feel less of the road and feel less bumps, cracks, etc.

The ultimate in performance, style and handling. ST height adjustable Coilover kits are precision engineered and road tested to the highest standards of the German TUV. Our threaded shock Bodies allow you to customize vehicles ride height to the maximum, without compromising safety, functionality or superior driving performance.

These coilovers allow you to adjust the suspension

• Front Lowering: 1.4 to 2.6 inch drop
• Rear Lowering: 1.4 to 2.6 inch drop

Also note: these come with their own rotation bearings, so you do not need to buy new rotating bearings when installing these. You just need to make sure your strut mounts are in good shape, and you are ready to install these!