Skill

Low

Re-Coat

4-24 hours

Low VOC

Yes

Coverage Rate

6-8sqm/L

Mix Ratio

2:1 (resin to hardener)

Equipment

Roller, Trowel

Pigment

Epoxy

Solids

100%

Flash epoxy is a rapid curing, medium viscocity epoxy binder. Flash epoxy is designed to be used wherever rapid curing, high performance structural
properties are required and exposure to strong acids and solvents is not a prime
service requirement. Flash epoxy is frequently used in epoxy screeds or for epoxy coving to rapid return to service.You can use Flash Epoxy in conjunction with selected
quartz aggregates to form either a trowelled mortar or slurry type topping. It is
the ideal binder for the quick repair of damaged concrete surfaces.

Data sheet

View data sheet

Features and benefits

• Extremely rapid curing with 1-2 hours between coats
• High compressive strength
• allows quic k return to service
• Versatile mix ratio with quartz fillers
• Low odour, will not taint food
• Can be used as a primer, binder & sealer
• Compatible with all other Hychem coatings and toppings

Ideal for

• Grouting holding down bolts into concrete
• Resurfacing worn and damaged concrete slabs
• Re-levelling concrete floors to obtain falls to drains
• Patching holes and cavities in walls, drains & floors
• Bonding new to old concrete toppings
• Laying anti-slip toppings in factories, warehouses & service areas
• As an underlay for heavy duty epoxy coatings
• Priming concrete surfaces
• As an expansion joint repair mortar

Colour Chart

View Hychem colour chart