Sable Brown

Wood Stain Kit

Tamco's Wood Stains offer several advantages over oil-based stains. They emphasize fast drying times, rich colors that enhance wood grain, vibrant color effects, and even color distribution without the “splotchy” look. The ease of application is highlighted as well, contrasting with the longer drying times and potential difficulties of oil-based stains, which can result in a patchy appearance.

Tamco's Wood Stains are positioned as a user-friendly and effective alternative for achieving consistent and attractive results on all wood surfaces. It covers a large area and provides substantial coverage per application.

They are ideal for staining all unfinished automotive type wood, marine type wood, wood furniture, cabinets, doors, trim, molding, and even hardwood decks/floors can be stained with Tamco®Wood Stains.

Kit Contains

This Kit Contains The Following Products:

• Quart / Sable Brown / No Cleaners Needed

• (1) Forever Seal ONLY - Quart / Clear (Tintable)
• (1) Sable Brown Wood Stain ONLY - Quart / Sable Brown
• (4) Paint Strainers (Free Add On When In Stock) - 125 Micron
• (2) Wooden Mixing Sticks (Free Add On When In Stock) - 12" Wood Mixing Sticks

• Quart / Sable Brown / Qt - HR397W Waterbourne Wax & Grease Remover

• (1) Forever Seal ONLY - Quart / Clear (Tintable)
• (1) Sable Brown Wood Stain ONLY - Quart / Sable Brown
• (1) HR397W Waterbourne Wax & Grease Remover - Gallon
• (4) Paint Strainers (Free Add On When In Stock) - 125 Micron
• (2) Wooden Mixing Sticks (Free Add On When In Stock) - 12" Wood Mixing Sticks

• Quart / Sable Brown / Qt - HR397 Wax & Grease Remover

• (1) Forever Seal ONLY - Quart / Clear (Tintable)
• (1) Sable Brown Wood Stain ONLY - Quart / Sable Brown
• (1) HR397 Wax & Grease Remover - Gallon
• (4) Paint Strainers (Free Add On When In Stock) - 125 Micron
• (2) Wooden Mixing Sticks (Free Add On When In Stock) - 12" Wood Mixing Sticks

Q&A 

Q: What is the best cleaner HR397 or HR397W?

A: HR397W is a waterborne cleaner , it absorbs into the wood and will make it slightly swell. After absorbs swells ( you cant see this) and flash dries it will leave the pores of the wood open to absorb the stain easily and to full strength.

HR397 will also work without any issues, but it will evaporate very quickly and not leave the pores open in the wood as a waterborne will.

HR1360 can also be used as a cleaner, but it will evaporate very quickly and not leave the pores open in the wood as a waterborne will.

Q: What grit sandpaper should I use before Foreverseal clear??

A: Presand with  is 120 or150  final sand is 220 or 240

Q: What is ways I can apply the Tamco Stain?

A:  Brush or spray. Rolling is not recommend due to lint. Any rags being used must be lint free.

Q: Will any Tamco Clear work or just AmerFlint II Clearcoat?

A:  All our our Tamco Clear coats will work. We choose AmerFlint II due to its extreme DOI, gloss retention, UV and salt water resistance.

YouTube Videos

.