Will this work with my existing hose clamps?

This hose is sized at 2.25" inner diameter. Standard worm-gear or band clamps rated for that diameter will work — just make sure your clamps aren't corroded or damaged before reuse.

Can I use this on a turbo intake or coolant line?

Yes. 3-ply silicone handles both boost and coolant temps. For turbo applications, you may want to double-clamp each end if your system sees sustained peak pressure — consult your turbo kit's routing specs.

Does this need any prep before installation?

Inspect the inside and outside for debris or manufacturing dust, then wipe clean. Dry-fit it first to confirm your line runs without kinking. Once positioned, tighten clamps evenly and check for leaks after your first heat cycle.